 |
| |
Switch cutting widths instantly by reprogramming the saw's computer. |
 |
| |
Use water to cool your blade, control dust, and reduce wear and tear. |
|
|
[Make Efficient Cuts]
[Increase Savings]
[Specifications]
[Narrow Belt Block Saw Manufacturers]
|
 |
NARROW DIAMOND BELT
AND GUIDE BAR
[Make Efficient Cuts]
Get up to 40 percent more useable stone with
precision Diamond Belt Technology.
With a WF Meyers Narrow Diamond Belt and Guide Bar, you'll see faster, more accurate cuts for slabbing and squaring. You'll also reduce the amount of additional finishing and get your stone closer to the finished product while moving at cutting speeds of up to 14 inches per minute.
Our belts come in a variety of cutting lengths -- from nine feet to 14 feet -- and cut a variety of stone from limestone, hard limestone, marble, and sandstone to bluestone or travertine. You can easily cut away or cut around imperfections and get more useable stone.
[Increase Savings]
Efficiently squaring your stone will also help you:
Save on transportation costs.
Reduce stone breakage during the finishing stage.
Produce clean, smooth cuts on every area of the stone’s surface to minimize breakage during the planing process.
Avoid moving stone twice by making precise cuts, leaving waste and imperfect portions of the stone on site. Get more useable stone from your quarry or fabrication operation with the WF Meyers Narrow Diamond Belt and Guide Bar -- part of the WF Meyers sophisticated system for today's quarryman -- from extracting raw stone out of the ground to rough-cuts and slabbing.
[Specifications]
CUTTING RATE
Limestone: 12 to 14 inches per minute
Marble and other
hard stone: five inches per minute
BLADE LIFE/RANGE
Limestone: 100,000 square feet
Marble and other
hard stone: 25,000 square feet
[Narrow Belt Block Saw Manufacturers]
We recommend the following Narrow Belt Block Saw manufacturers:
Standish Steel Company
Route 16 Box 1038
Bedford, Indiana 47421
812-834-5255
www.standishsteelinc.com
Sawing Systems
2918 Cherry Street Arcade
Post Office Box 3754
Knoxville, Tennessee 37927
423-525-2320
www.sawingsystems.com/
|
|
Precision cutting
Cut limestone, hard limestone, marble, sandstone, bluestone or travertine.
|
|
|
